RDF510 Siemens Thermostat
- Â Heated or cooled with 2-pipe fan coil units
- 3-Speed Fan
- One to Two On/Off Valve Actuators
- Display either room temperature or setpoint
- Automatic or manual heating/cooling changeover
- Internal sensor calibration
$0.00
Operating voltage | AC 230 V (+10%, -15%) |
Frequency | 50/60 Hz |
Power consumption | Max. 12 VA |
Degree of protection | IP30 |
Outputs | |
Valve output | AC 230 V |
Rating | 5 mA…4(2) A |
3 Speed Fan output | AC 230 V |
Rating | 5 mA…4(2) A |
Operational data | |
Switching differential | |
Heating mode | 0.5…6 K |
Cooling mode | 0.5…6 K |
Quantity | Plus 19%VAT | incl. 19%VAT |
---|---|---|
From 1 pcs | 44$ | 52$ |
From 5pcs | 42$ | 50$ |
From 10pcs | 40$ | 48$ |
RDF510 Siemens Thermostat
Pressure Independent Combi Valve VPF43.125F110, flanged type end connection, nominal pressure PN16, nominal size DN125, volume flow rate of 18.5-110 m3/h. Distinguished features of Siemens flanged type PICV’s as follows: Maximum Volumetric Flow Presetting Integrated Differential Pressure Controller Pressure Measuring Points Actuators for every control requirement
To control the air velocity to a constant value, or to balance out pressure fluctuations (supply or extract air control), or to monitor the flow in air ducts. Primarily is used for modulating fan control in primary plants to set the basic volume flow. Available in three measuring ranges : 0...5 m/s, 0...10 m/s, and...
Siemens SUA 21/3 Electro-Motoric Actuator 230VAC 2 Position
VPF43.65F35 Pressure Independent Combi Valve, flanged, PN16, DN65, 6…35 m3/h. For closed hydraulic circuits. s. Compatible electromotoric actuators SAX..P.., SAV..P.. and SQV..P.. . For cooling water, hot water and for water with anti-freeze. Suitable Actuators: SAX61P03.
Leave a Reply