Shop by category
Siemens Fan Coil Room Thermostat RDF510 AC230V
$0.00
| Operating voltage | AC 230 V (+10%, -15%) |
| Frequency | 50/60 Hz |
| Power consumption | Max. 12 VA |
| Degree of protection | IP30 |
| Outputs | |
| Valve output | AC 230 V |
| Rating | 5 mA…4(2) A |
| 3 Speed Fan output | AC 230 V |
| Rating | 5 mA…4(2) A |
| Operational data | |
| Switching differential | |
| Heating mode | 0.5…6 K |
| Cooling mode | 0.5…6 K |
| Quantity | Plus 19%VAT | incl. 19%VAT |
|---|---|---|
| From 1 pcs | 44$ | 52$ |
| From 5pcs | 42$ | 50$ |
| From 10pcs | 40$ | 48$ |
HURRY! ONLY LEFT IN STOCK.
RDF510 Siemens Thermostat
- Heated or cooled with 2-pipe fan coil units
- 3-Speed Fan
- One to Two On/Off Valve Actuators
- Display either room temperature or setpoint
- Automatic or manual heating/cooling changeover
- Internal sensor calibration
Download
RELATED PRODUCTS
Siemens SAV61P00 24v Modulating Actuator 0-10v for PICV DN100-150
$0.00Siemens SAV61P00 – Electromotoric actuator, 1100 N
Siemens Air Velocity Sensor QVM62.1
$0.00To control the air velocity to a constant value, or to balance out pressure fluctuations (supply or extract air control), or to monitor the flow in air ducts. Primarily is used for modulating fan control in primary plants to set the basic volume flow. Available in three measuring ranges : 0...5 m/s, 0...10 m/s, and...
Siemens PICV DN100 – VPF43.100F70
$0.00Pressure Independent Combi Valve VPF43.100F70, flanged type end connection, nominal pressure PN16, nominal size DN100, volume flow rate of 12.1- 68 m3/h. Distinguished features of Siemens flanged type PICV’s as follows: Maximum Volumetric Flow Presetting Integrated Differential Pressure Controller Pressure Measuring Points Actuators for every control requirement
Leave a Reply