The SEM62.1 Standard Transformer
Primary Supply 230V AC, Secondary Supply 24V AC
Output power rating of 30 VA.
An integral self-resetting fuse on the primary side protects the transformer from overheating.
Suitable for mounting on DIN rails
Reduction in Voltage | AC 230 V to AC 24 V |
Power supply | AC 230V -15….+10% |
Primary electrical data – Power consumption | Max. 200mA |
Secondary electrical data – Voltage (Safety extra low voltage) | AC 24V |
Weight (Including Packaging) | 0.9kg |
Dimensions(W x H x D) | 113.8 x 106 x 56.4 mm |
The SEM62.1 Standard Transformer
Primary Supply 230V AC, Secondary Supply 24V AC
Output power rating of 30 VA.
An integral self-resetting fuse on the primary side protects the transformer from overheating.
Suitable for mounting on DIN rails
Siemens QFM2100 Symaroâ„¢ Duct sensors for measuring relative humidity and temperature in air ducts of ventilation and air conditioning. The sensors are used as: i) Control sensors in the supply or extract air. ii) Reference sensors, e.g. for shifting the dew point. iii) Limit sensors, e.g. in connection with steam humidifiers. iv) Limit sensors, e.g....
Siemens SSA61EP (Equal Percentage) Modulating Actuator 24v (0-10v) Nominal Force 100N
To control the air velocity to a constant value, or to balance out pressure fluctuations (supply or extract air control), or to monitor the flow in air ducts. Primarily is used for modulating fan control in primary plants to set the basic volume flow. Available in three measuring ranges : 0...5 m/s, 0...10 m/s, and...
SAY31P03 – Electromotoric actuator, 3-Position 230v, 200 N, 15 mm,
Tridonic LED Driver LC 60W 1050mA fixC SC ADV with Article Number: 87500452 Fixed output LED Driver Can be either used built-in or independent with clip-on strain-relief (see accessory) Independent LED Driver with cable clamps Constant current LED Driver For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13...
Tridonic LC 25W 600mA fixC SC ADV Fixed output LED Driver Can be either used built-in or independent with clip-on strain-relief (see accessory) Independent LED Driver with cable clamps For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Constant current LED Driver Output current 600 mA Max....
Leave a Reply