Shop by category
Hot
ONTEC E Wall Mounted Exit Light
$0.00
TM Technologie ONTEC E Series
- A new range of LED Wall mounted Exit Light, that has been constructed to perform bright and high illumination surface.
- Evacuation road direction sign made of polycarbonate PC housing, and ABS diffuser.
- Luminaire equipped with high efficiency LED modules with service life up to 50,000 hours.
HURRY! ONLY LEFT IN STOCK.
TM Technologie ONTEC E Wall Mounted LED Exit Light
- QCD (Qatar Civil Defense Approved).
- High luminance up to 500cd/m².
- Maintained (M) and Non-Maintained (NM) versions.
- Extended lifetime with LifePO4 batteries
- Edge-lit uniform lamination
| Model | E1B 301, E1E 01, E1P 01, E1P 301 |
|---|---|
| Version | AT, CB1, CB4, DATA/DATA2, ST |
| Light source | 8 LED |
| Luminance | ≥ 300 cd/m2 / ≥ 500 cd/m2* |
| Warranty | 24 months** |
| Application | Evacuation road direction (evacuation sign) |
| Available versions | AT – autotest, CB – central battery, DATA, DATA 2 – diversified system, ST – standard version |
| Power supply | 210÷250 V AC 50÷60 Hz |
| Power supply cb | 210÷250 V AC 50÷60 Hz; 186÷254 V DC |
| Protection type | IP20 |
| Isolation class | II |
| Material | housing: PC/ABS + ALU/Metal |
| Housing colour | RAL 7035, RAL 9003, RAL 9004 |
| Mode | Maintained, non-maintained |
| Autonomy | 3h |
| Temperature range | ta -10°C ÷ +40°C (CB2, CB3, CB4), ta -15°C ÷ +55°C (CB1), ta +10°C ÷ +35°C |
| Glow wire test | 850°C |
| Standards | PN-EN 1838, PN-EN 55015, PN-EN 60598-1, PN-EN 60598-2-22, PN-EN 61000-3-2, PN-EN 61347-1, PN-EN 61347-2-13, PN-EN 61347-2-7, PN-EN 62031, PN-EN 62471 |
Assembly
Models
| Type | Model | Light source | Time | Mode | Luminance | Active Power | Battery | Version |
| INDIVIDUAL SYSTEMS | ||||||||
| ONTEC E | E1B 301 | 8 LED | 3 h | M / NM | ≥ 300 cd/m2 | 2.5 W | Ni-Cd HT 3,6 V 0,8 Ah | ST, AT, DATA, DATA 2 |
| ONTEC E | E1E 301 | 8 LED | 3 h | M / NM | ≥ 300 cd/m2 | 4.8 W | LifePO4/C 6,4 V 0,6 Ah | ST, AT, DATA, DATA 2 |
| ONTEC E | E1P 301 | 8 LED | 3 h | M / NM | ≥ 500 cd/m2 | 5.2 W | LifePO4/C 6,4 V 1,5 Ah | ST, AT, DATA, DATA 2 |
| CENTRAL SYSTEMS | ||||||||
| ONTEC E | E1E 01 CB | 8 LED | – | – | ≥ 300 cd/m2 | 2.1 W | – | CB |
| ONTEC E | E1P 01 CB | 8 LED | – | – | ≥ 500 cd/m2 | 2.7 W | – | CB |
Visibility
Pictograms:
ONTEC E Datasheet
ONTEC E Installation InstructionRELATED PRODUCTS
ONTEC S IP65 Exit Light
$0.00TM Technologie ONTEC S Series, an QCD Approved LED Exit Light.
- Universal application for antipanic, escape route lighting, and evacuation road direction.
- Housing made of polycarbonate and ABS, with mechanical strength of IK08.
- Accessories available for double sided, recessed application, and protective cage.
LC 40W 900mA fixC SC ADV
$0.00Tridonic LED Driver LC 40W 900mA fixC SC ADV with Article Number: 87500344 Fixed output LED Driver Can be either used built-in or independent with clip-on strain-relief (see accessory) Independent LED Driver with cable clamps Constant current LED Driver For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13...
RECENT VIEWER
iTech Z Suspended Exit Light IP65
$0.00TM Technologie iTech Z Series is an LED Suspended IP65 Exit Light, QCD (Qatar Civil Defense Approved). Body constructed from polycarbonate (PC) and ABS, available in white, grey, and black finish. Therefore, the ideal architectural escape sign with high protection. Fittings supplied standard test, auto-test, central monitoring, and central battery version.
Leave a Reply