Shop by category
Hot
ONTEC E Wall Mounted Exit Light
$0.00
TM Technologie ONTEC E Series
- A new range of LED Wall mounted Exit Light, that has been constructed to perform bright and high illumination surface.
- Evacuation road direction sign made of polycarbonate PC housing, and ABS diffuser.
- Luminaire equipped with high efficiency LED modules with service life up to 50,000 hours.
HURRY! ONLY LEFT IN STOCK.
TM Technologie ONTEC E Wall Mounted LED Exit Light
- QCD (Qatar Civil Defense Approved).
- High luminance up to 500cd/m².
- Maintained (M) and Non-Maintained (NM) versions.
- Extended lifetime with LifePO4 batteries
- Edge-lit uniform lamination
| Model | E1B 301, E1E 01, E1P 01, E1P 301 |
|---|---|
| Version | AT, CB1, CB4, DATA/DATA2, ST |
| Light source | 8 LED |
| Luminance | ≥ 300 cd/m2 / ≥ 500 cd/m2* |
| Warranty | 24 months** |
| Application | Evacuation road direction (evacuation sign) |
| Available versions | AT – autotest, CB – central battery, DATA, DATA 2 – diversified system, ST – standard version |
| Power supply | 210÷250 V AC 50÷60 Hz |
| Power supply cb | 210÷250 V AC 50÷60 Hz; 186÷254 V DC |
| Protection type | IP20 |
| Isolation class | II |
| Material | housing: PC/ABS + ALU/Metal |
| Housing colour | RAL 7035, RAL 9003, RAL 9004 |
| Mode | Maintained, non-maintained |
| Autonomy | 3h |
| Temperature range | ta -10°C ÷ +40°C (CB2, CB3, CB4), ta -15°C ÷ +55°C (CB1), ta +10°C ÷ +35°C |
| Glow wire test | 850°C |
| Standards | PN-EN 1838, PN-EN 55015, PN-EN 60598-1, PN-EN 60598-2-22, PN-EN 61000-3-2, PN-EN 61347-1, PN-EN 61347-2-13, PN-EN 61347-2-7, PN-EN 62031, PN-EN 62471 |
Assembly
Models
| Type | Model | Light source | Time | Mode | Luminance | Active Power | Battery | Version |
| INDIVIDUAL SYSTEMS | ||||||||
| ONTEC E | E1B 301 | 8 LED | 3 h | M / NM | ≥ 300 cd/m2 | 2.5 W | Ni-Cd HT 3,6 V 0,8 Ah | ST, AT, DATA, DATA 2 |
| ONTEC E | E1E 301 | 8 LED | 3 h | M / NM | ≥ 300 cd/m2 | 4.8 W | LifePO4/C 6,4 V 0,6 Ah | ST, AT, DATA, DATA 2 |
| ONTEC E | E1P 301 | 8 LED | 3 h | M / NM | ≥ 500 cd/m2 | 5.2 W | LifePO4/C 6,4 V 1,5 Ah | ST, AT, DATA, DATA 2 |
| CENTRAL SYSTEMS | ||||||||
| ONTEC E | E1E 01 CB | 8 LED | – | – | ≥ 300 cd/m2 | 2.1 W | – | CB |
| ONTEC E | E1P 01 CB | 8 LED | – | – | ≥ 500 cd/m2 | 2.7 W | – | CB |
Visibility
Pictograms:
ONTEC E Datasheet
ONTEC E Installation InstructionRELATED PRODUCTS
ONTEC D “M” Series – Anti panic
$0.00ONTEC D “M” Series Without Optic for Distributed Illumination From the Ceiling. Minimalistic design.
ONTEC S IP65 “M” Series Anti-panic
$0.00ONTEC S M Series Without Optic for Distributed Illumination From the Ceiling.
ONTEC R “C” – Wide Beam Emergency Light
$0.00C Series With Emerald-A Optic for Corridors. Compact elegant fitting design.
RECENT VIEWER
ONTEC R “M” Series – Anti Panic
$0.00- M Series Without Optic for Distributed Illumination From the Ceiling.
- Robust and elegant.
Siemens Duct Sensor For Temperature & Humidity – QFM2160
Siemens Symaro Duct sensors for measuring relative humidity and temperature in air ducts of ventilation and air conditioning. The sensors are used as: i) Control sensors in the supply or extract air. ii) Reference sensors, e.g. for shifting the dew point. iii) Limit sensors, e.g. in connection with steam humidifiers. iv) Limit sensors, e.g. for...
Leave a Reply