Shop by category
Hot
ONTEC E Wall Mounted Exit Light
$0.00
TM Technologie ONTEC E Series
- A new range of LED Wall mounted Exit Light, that has been constructed to perform bright and high illumination surface.
- Evacuation road direction sign made of polycarbonate PC housing, and ABS diffuser.
- Luminaire equipped with high efficiency LED modules with service life up to 50,000 hours.
HURRY! ONLY LEFT IN STOCK.
TM Technologie ONTEC E Wall Mounted LED Exit Light
- QCD (Qatar Civil Defense Approved).
- High luminance up to 500cd/m².
- Maintained (M) and Non-Maintained (NM) versions.
- Extended lifetime with LifePO4 batteries
- Edge-lit uniform lamination
| Model | E1B 301, E1E 01, E1P 01, E1P 301 |
|---|---|
| Version | AT, CB1, CB4, DATA/DATA2, ST |
| Light source | 8 LED |
| Luminance | ≥ 300 cd/m2 / ≥ 500 cd/m2* |
| Warranty | 24 months** |
| Application | Evacuation road direction (evacuation sign) |
| Available versions | AT – autotest, CB – central battery, DATA, DATA 2 – diversified system, ST – standard version |
| Power supply | 210÷250 V AC 50÷60 Hz |
| Power supply cb | 210÷250 V AC 50÷60 Hz; 186÷254 V DC |
| Protection type | IP20 |
| Isolation class | II |
| Material | housing: PC/ABS + ALU/Metal |
| Housing colour | RAL 7035, RAL 9003, RAL 9004 |
| Mode | Maintained, non-maintained |
| Autonomy | 3h |
| Temperature range | ta -10°C ÷ +40°C (CB2, CB3, CB4), ta -15°C ÷ +55°C (CB1), ta +10°C ÷ +35°C |
| Glow wire test | 850°C |
| Standards | PN-EN 1838, PN-EN 55015, PN-EN 60598-1, PN-EN 60598-2-22, PN-EN 61000-3-2, PN-EN 61347-1, PN-EN 61347-2-13, PN-EN 61347-2-7, PN-EN 62031, PN-EN 62471 |
Assembly
Models
| Type | Model | Light source | Time | Mode | Luminance | Active Power | Battery | Version |
| INDIVIDUAL SYSTEMS | ||||||||
| ONTEC E | E1B 301 | 8 LED | 3 h | M / NM | ≥ 300 cd/m2 | 2.5 W | Ni-Cd HT 3,6 V 0,8 Ah | ST, AT, DATA, DATA 2 |
| ONTEC E | E1E 301 | 8 LED | 3 h | M / NM | ≥ 300 cd/m2 | 4.8 W | LifePO4/C 6,4 V 0,6 Ah | ST, AT, DATA, DATA 2 |
| ONTEC E | E1P 301 | 8 LED | 3 h | M / NM | ≥ 500 cd/m2 | 5.2 W | LifePO4/C 6,4 V 1,5 Ah | ST, AT, DATA, DATA 2 |
| CENTRAL SYSTEMS | ||||||||
| ONTEC E | E1E 01 CB | 8 LED | – | – | ≥ 300 cd/m2 | 2.1 W | – | CB |
| ONTEC E | E1P 01 CB | 8 LED | – | – | ≥ 500 cd/m2 | 2.7 W | – | CB |
Visibility
Pictograms:
ONTEC E Datasheet
ONTEC E Installation InstructionRELATED PRODUCTS
ONTEC S IP65 “W” – Wall Mounted Emergency Light
$0.00ONTEC S W Series with asymmetrical lens - Wall Mounted Emergency Light
ONTEC R “M” Series – Anti Panic
$0.00- M Series Without Optic for Distributed Illumination From the Ceiling.
- Robust and elegant.
iTech IP65 “W” – Wall Mounted Emergency Light
$0.00W Series With Strada FT Optic for asymmetrical illumination – wall mounted application
LC 25W 600mA fixC SC ADV
$0.00Tridonic LC 25W 600mA fixC SC ADV Fixed output LED Driver Can be either used built-in or independent with clip-on strain-relief (see accessory) Independent LED Driver with cable clamps For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Constant current LED Driver Output current 600 mA Max....
RECENT VIEWER
Tridonic Module RLE Excite & Advanced
$0.00Modules RLE Rectangular LED Modules for Outdoor and Industrial Luminaires Product description High efficiency outdoor modules Suitable for harsh and humid outdoor conditions Tested acc. to salt spray test (IEC 60068-2-52) and harmful gas test (GR-1217-CORE) Huge performance temperature range from -40 ... +95 °C Surge tested (+/- to earth) 6 kV with Tridonic LED...
Leave a Reply