Shop by category
Hot
ONTEC E Wall Mounted Exit Light
$0.00
TM Technologie ONTEC E Series
- A new range of LED Wall mounted Exit Light, that has been constructed to perform bright and high illumination surface.
- Evacuation road direction sign made of polycarbonate PC housing, and ABS diffuser.
- Luminaire equipped with high efficiency LED modules with service life up to 50,000 hours.
HURRY! ONLY LEFT IN STOCK.
TM Technologie ONTEC E Wall Mounted LED Exit Light
- QCD (Qatar Civil Defense Approved).
- High luminance up to 500cd/m².
- Maintained (M) and Non-Maintained (NM) versions.
- Extended lifetime with LifePO4 batteries
- Edge-lit uniform lamination
| Model | E1B 301, E1E 01, E1P 01, E1P 301 |
|---|---|
| Version | AT, CB1, CB4, DATA/DATA2, ST |
| Light source | 8 LED |
| Luminance | ≥ 300 cd/m2 / ≥ 500 cd/m2* |
| Warranty | 24 months** |
| Application | Evacuation road direction (evacuation sign) |
| Available versions | AT – autotest, CB – central battery, DATA, DATA 2 – diversified system, ST – standard version |
| Power supply | 210÷250 V AC 50÷60 Hz |
| Power supply cb | 210÷250 V AC 50÷60 Hz; 186÷254 V DC |
| Protection type | IP20 |
| Isolation class | II |
| Material | housing: PC/ABS + ALU/Metal |
| Housing colour | RAL 7035, RAL 9003, RAL 9004 |
| Mode | Maintained, non-maintained |
| Autonomy | 3h |
| Temperature range | ta -10°C ÷ +40°C (CB2, CB3, CB4), ta -15°C ÷ +55°C (CB1), ta +10°C ÷ +35°C |
| Glow wire test | 850°C |
| Standards | PN-EN 1838, PN-EN 55015, PN-EN 60598-1, PN-EN 60598-2-22, PN-EN 61000-3-2, PN-EN 61347-1, PN-EN 61347-2-13, PN-EN 61347-2-7, PN-EN 62031, PN-EN 62471 |
Assembly
Models
| Type | Model | Light source | Time | Mode | Luminance | Active Power | Battery | Version |
| INDIVIDUAL SYSTEMS | ||||||||
| ONTEC E | E1B 301 | 8 LED | 3 h | M / NM | ≥ 300 cd/m2 | 2.5 W | Ni-Cd HT 3,6 V 0,8 Ah | ST, AT, DATA, DATA 2 |
| ONTEC E | E1E 301 | 8 LED | 3 h | M / NM | ≥ 300 cd/m2 | 4.8 W | LifePO4/C 6,4 V 0,6 Ah | ST, AT, DATA, DATA 2 |
| ONTEC E | E1P 301 | 8 LED | 3 h | M / NM | ≥ 500 cd/m2 | 5.2 W | LifePO4/C 6,4 V 1,5 Ah | ST, AT, DATA, DATA 2 |
| CENTRAL SYSTEMS | ||||||||
| ONTEC E | E1E 01 CB | 8 LED | – | – | ≥ 300 cd/m2 | 2.1 W | – | CB |
| ONTEC E | E1P 01 CB | 8 LED | – | – | ≥ 500 cd/m2 | 2.7 W | – | CB |
Visibility
Pictograms:
ONTEC E Datasheet
ONTEC E Installation InstructionRELATED PRODUCTS
ONTEC S IP65 “F” – Narrow Beam Emergency Light
$0.00F Series With Flare Mini Optic for focused illumination - high ceilings application
iTech IP65 “C” Series – Escape Route Wide Beam
$0.00C Series With Emerald-A Lens for Corridors application
Leave a Reply