Shop by category
ONTEC D “C” – Wide Beam Emergency Light
$0.00
(C Series With Emerald-A Optic for Corridors)
HURRY! ONLY LEFT IN STOCK.
TM Technologie ONTEC D “C” Series, LED Recessed Emergency Light, QCD (Qatar Civil Defense Approved)
- High Luminance fittings in compliance with NFPA101 and QCD requirements (10.8lux) for anti-panic lighting
- Application in Auto Test, Manual Test, Central Monitoring, and Central Battery modes.
- Maintained (M) and Non-Maintained (NM) versions
- Easy installation with modular electronics design
- Extended life-time when supplied with LiFePO4 batteries
ONTEC D “C” Series, for escape route emergency lighting function supplied with Emerald lens, primarily designed for escape route emergency lighting with wide beam illumination.
| Brand | TM Technologie |
|---|---|
| Light source | 1 LED |
| Model | C1 02, C1 302, C1H 303, C1U 301 |
| Available versions | AT – autotest, CB – central battery, DATA-DATA2 – diversified system, ST – standard version |
| Mode | Maintained, Maintained/Non-Maintained, non-maintained |
| Power | 1W, 2W, 3W |
| Luminous flux | 115 lm, 128 lm, 235 lm, 320 lm |
| Warranty | 24 Months |
| Application | escape route lighting |
| Power supply | 210÷250 V AC 50÷60 Hz |
| Power supply cb | 210÷250 V AC 50÷60 Hz; 184÷254 V DC |
| Protection type | IP20 |
| Isolation class | II |
| Material | housing: PC/ABS |
| Housing colour | RAL 7035, RAL 9003, RAL 9004, special colour |
| Autonomy | 3h |
| Temperature range | ta -10°C ÷ +40°C (CB2, CB3, CB4), ta -15°C ÷ +55°C (CB1), ta +10°C ÷ +35°C |
| Glow wire test | 850°C |
| Standards | PN-EN 1838, PN-EN 55015, PN-EN 60598-1, PN-EN 60598-2-22, PN-EN 61000-3-2, PN-EN 61347-1, PN-EN 61347-2-13, PN-EN 61347-2-7, PN-EN 62031, PN-EN 62471 |
Assembly
Models
| Type | Model | Light source | Time | Mode | Active Power | Battery | Luminous flux | Version | |
| INDIVIDUAL SYSTEMS | |||||||||
| ONTEC D | C1 302 | 1 LED | 3 h | M / NM | 7 W | LiFePO4/C 6.4V 1.5Ah | 247 lm | ST, AT, DATA, DATA 2 | |
| ONTEC D | C1H 303 | 1 LED | 3 h | M / NM | 8.6 W | LiFePO4/C 6.4V 3.0Ah | 336 lm | ST, AT, DATA, DATA 2 | |
| CENTRAL SYSTEMS | |||||||||
| ONTEC D | C1 02 CB | 1 LED | – | – | 4.4 W | – | 247 lm | CB | |
| ONTEC D | C1H 03 CB | 1 LED | – | – | 6 W | – | 336 lm | CB | |
ONTEC D Datasheet
ONTEC D Installation InstructionRELATED PRODUCTS
iTech IP65 “F” – Narrow Beam Emergency Light
$0.00F Series with Flare-Mini lens for challenging ceiling heights.
TM-CB A
$0.00Allow to connect tube, halogen or led fittings, depending on applied modules. The central battery operates up to 24 output circuits, 64 substations. A maximum number of circuits is 1536 which allows for connecting and monitoring of up to 30 720 fittings.
ONTEC S IP65 “M” Series Anti-panic
$0.00ONTEC S M Series Without Optic for Distributed Illumination From the Ceiling.
ONTEC E Wall Mounted Exit Light
$0.00TM Technologie ONTEC E Series
- A new range of LED Wall mounted Exit Light, that has been constructed to perform bright and high illumination surface.
- Evacuation road direction sign made of polycarbonate PC housing, and ABS diffuser.
- Luminaire equipped with high efficiency LED modules with service life up to 50,000 hours.
Leave a Reply